Raw Building Materials


Save on Raw Building Materials at Armstrongs Point. Top brands include C.R. Laurence, CR Laurence, Malco, NextStone, Woodcraft Woodshop, WOODNSHOP, Cindoco, Peak, & SIBE-R-PLASTIC SUPPLY. Hurry! Limited time offers. Offers valid only while supplies last.



C.R. LAURENCE S13GP CRL Gold Plated Adjustable Slim Line Glass Mount Fitting
C.R. LAURENCE S13GP CRL Gold Plated Adjustable Slim Line Glass Mount Fitting
By C.R. Laurence
In Stock
$21.96

mpn: S13GP,

4.3 out of 5 stars with 138 reviews
Fits All Support Bars Available in Many Attractive Finishes Easy to Install This CRL Adjustable Slim Line Fitting is designed to be installed when the support bar has to be the same height as the fixed panel. This Wall Mount Fitting can be moved to any desired location on the panel where a support is required. It is designed to be used with our CRL Support Bars. Color: Gold Plated Bracket Length: 2-7/8 in (73 mm) Minimum Order: 1 EachAccepts S1, S2, or S80 Bar. Sleeves Over 1/4'' to 1/2'' (6 to


C.R. LAURENCE S13ABR CRL Antique Brass Adjustable Slim Line Glass Mount Fitting
C.R. LAURENCE S13ABR CRL Antique Brass Adjustable Slim Line Glass Mount Fitting
By C.R. Laurence
In Stock
$142.90

mpn: S13ABR,

4.6 out of 5 stars with 147 reviews
Fits All Support Bars Available in Many Attractive Finishes Easy to Install This CRL Adjustable Slim Line Fitting is designed to be installed when the support bar has to be the same height as the fixed panel. This Wall Mount Fitting can be moved to any desired location on the panel where a support is required. It is designed to be used with our CRL Support Bars. Color: Antique Brass Bracket Length: 2-7/8 in (73 mm) Minimum Order: 1 EachSlim Line Glass Mount Fitting for 1/4'' (6 mm) to 1/2'' (12


CRL Adjustable Angle Suction Holder by CR Laurence
CRL Adjustable Angle Suction Holder by CR Laurence
By CR Laurence
SKU: #UV282
In Stock
$214.45

sku: UV282, mpn: UV282,

4.6 out of 5 stars with 112 reviews
Holds Glass from Inside or Outside Surfaces While UV or Silicone Adhesive CuresAdjustableCRL Adjustable Angle Suction Holder holds glass panels from the inside or outside surfaces. Glass panels can be fixed at desired angle and adhered by UV or silicone adhesives easily. Height and position can be adjusted 11/16'' (18 mm) by knobs at each arm. The 4-3/4'' (120 mm) rubber suction pad with lip holds the glass panels firmly until the adhesive cures and they stick to each other. It is adjustable


Malco Fcfg Red Fiber Cement Siding Facing Gauge
Malco Fcfg Red Fiber Cement Siding Facing Gauge
By Malco
In Stock
$14.29

mpn: FCFG, ean: 0752913190049,

4.9 out of 5 stars with 81 reviews
Malco FCFG 10-7/8'' Fiber Cement Siding Facing Gauge. Using the Facing Gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The Facing Gauge may also be used in combination with the Malco Overlap Gauge to prop up one end of the plank for one-person application.More accurate and easier to use than home-made wood ''preacher'' blocks. Adjustable for precise 5'', 6'', 7'', or 8'' (127, 152, 178, or 203 mm) exposures. Gauging


NextStone 4ft. Metal Starter Strip for NextStone Polyurethane Stone Panels
NextStone 4ft. Metal Starter Strip for NextStone Polyurethane Stone Panels
By NextStone
In Stock
$3.54

mpn: MSS,

4.0 out of 5 stars with 18 reviews
4 Foot Metal Starter Strips are used to start a NextStoneTM project. These strips install about 2.5'' above ground and the first row of panels will sit in them perfectly.Strips are used to start the first row of NextStoneTM panels eliminating the need to screw through the front of the rock. Each strip is in 4 foot pieces. Starter Strips install approximately 2.5'' above ground. Made of stainless steel.


Single Piece of Baltic Birch Plywood, 3mm - 1/8'' x 12'' x 12''
Single Piece of Baltic Birch Plywood, 3mm - 1/8" x 12" x 12"
By Woodcraft Woodshop
In Stock
$2.50

mpn: 131138, ean: 0799360161659,

4.0 out of 5 stars with 45 reviews
This item is a single piece of 3mm-1/8'' x 12'' x 12'' Baltic Birch Plywood. The image above may show the various thicknesses that Woodcraft offers. This plywood is a functional grade material composed of birch from parts of Russia. The Baltic birch is graded as a B-BB, which means that one face, B, will be a whole face, no splices, have no patches (plugs that are used to cover defects) but may contain knot pattern or mineral streaks. The other face, BB, and the inner plies will contain patches


One sheet of Baltic Birch Plywood, 6mm - 1/4'' x 12'' x 12''
One sheet of Baltic Birch Plywood, 6mm - 1/4" x 12" x 12"
By Woodcraft Woodshop
In Stock
$3.25

mpn: 131139, ean: 0844788040052,

4.5 out of 5 stars with 38 reviews
Buy this product and you will receive ONE 6mm - 1/4'' x 12'' x 12'' sheet of B-BB grade Baltic Birch Plywood. This plywood is a functional grade material composed of birch from parts of Russia. The Baltic birch is graded as a B-BB, which means that one face, B, will be a whole face, no splices, have no patches (plugs that are used to cover defects) but may contain knot pattern or mineral streaks. The other face, BB, and the inner plies will contain patches and tight and not so tight knots.


RED OAK/boards lumber 3/4 X 2 X 24 surface 4 sides 24'' BY WOODNSHOP
RED OAK/boards lumber 3/4 X 2 X 24 surface 4 sides 24" BY WOODNSHOP
By WOODNSHOP
In Stock
$3.25
4.1 out of 5 stars with 45 reviews
RED OAK Boards Surfaced all Four Sides to measurement shown plus or minus 1/2'' on length and width Perfect for any projects wider boards my be glued up for width Just click on the box for the prices and widths available Widths available 2'' 3'' 4'' 5'' 6'' 7'' 8'' 9'' 10'' 11'' 12'' This is a new stock and may be combined with other items. A generic picture is used for this itemRED OAK Boards Surfaced all Four Sides to measurement shown plus or minus 1/2'' on length and width. RED OAK Lumber


Basswood/Boards Lumber 3/8 X 6 X 12 Surface 4 Sides by WOODNSHOP
Basswood/Boards Lumber 3/8 X 6 X 12 Surface 4 Sides by WOODNSHOP
By WOODNSHOP
In Stock
$3.20
4.2 out of 5 stars with 20 reviews
BASSWOOD Boards Surfaced all Four Sides to measurement shown plus or minus 1/2'' on length and width Perfect for any projects wider boards my be glued up for width Just click on the box for the prices and widths available Widths available 2'' 3'' 4'' 5'' 6'' 7'' 8'' 9'' 10'' 11'' 12'' This is a new stock and may be combined with other items. A generic picture is used for this itemBASSWOOD Boards Surfaced all Four Sides to measurement shown plus or minus 1/2'' on length and width. Just click on


Axle Pegs 7/32'' Diameter x 1-3/16'' Long, Maple 8-piece
Axle Pegs 7/32" Diameter x 1-3/16" Long, Maple 8-piece
By Cindoco
In Stock
$2.99

mpn: 153635, ean: 0811908011872,

4.8 out of 5 stars with 24 reviews
Wooden 1/4'' Axle Pegs. Made of one-piece hardwood for attaching wheels to the body of wooden cars and trucks. 1-3/16'' overall length, 1-1/16'' stem length, 7/32'' diameter. Bag of 8..


Peak Epoxy Rebar, 1/2'' x 1', #4
Peak Epoxy Rebar, 1/2" x 1', #4
By Peak
In Stock
$3.32

mpn: 2800, ean: 0629219028003,

4.6 out of 5 stars with 47 reviews
1/2 in. x 12 in. Green epoxy coated rebar is used for forming stakes, garden stakes, tent stakes, sprinkler head stakes, connector ties and concrete projects.Constructed from Steel with a Green Epoxy Coating to Prevent Surface Rust. Used for Forming Stakes, Garden Stakes, Tent Stakes, Sprinkler Head Stakes, Connector Ties and Concrete Projects. Pattern of Ridges Helps Concrete Grip the Bar. ASTM A615, No.4, Grade 60. Finish is Smooth Gloss Green with Clean Cut Ends.


SIBE-R-PLASTIC SUPPLY Black Styrene Sheets .06'' x 6'' x 12''
SIBE-R-PLASTIC SUPPLY Black Styrene Sheets .06" x 6" x 12"
By SIBE-R-PLASTIC SUPPLY
In Stock
$3.60

mpn: 1284B,

4.6 out of 5 stars with 21 reviews
High impact polystyrene is used for models, prototypes, signs, displays, enclosures, and more. It can be drilled, threaded, sawed, sheared, punched and machined. It can also be painted and has excellent forming properties. Its maximum heat resistance is 180F and the forming temp is -325F to 350F and is not UV stabilized.High impact resistance. Easy to paint and print on. Easy to assemble with adhesives or solvents. Outstanding thermoforming characteristics. Good machinability.



Viewing Page 1 of 1

View more products in Building Materials.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - armstrongspoint.org. All Rights Reserved.