Mounts & Accessories - Page 3 - Extreame Savings! Save up to 50%


Extreame Savings! Up to 50% off on Mounts & Accessories at Armstrongs Point, Page 3. Top brands include Overly Hautz, WEG, Rapidkut, YXQ, ReFaXi, TOPCHANCES, LM YN, MagiDeal, Gas and Water, SODIAL(R), uniquegoods, TOOGOO(R), Boston Gear, & ABUFF. Hurry! Limited time offers. Offers valid only while supplies last.



Adjustable Steel Motor Mounting Base, For NEMA Frames 184T/184, Bolt Size 3/8 Inch, Length 12 3/4 Inches, Height 1 1/2 Inches, Width 10 1/2 Inches
By Overly Hautz
In Stock
$29.47
$22.75
You Save: 23%

mpn: 184, ean: 0696738190184,

4.0 out of 5 stars with 63 reviews
Pan Bases for Smaller Motors - Style A. These bases are intended primarily for smaller motors ranging from large fractionals to approximately 20 horsepower. They feature a one-piece formed base plate and the Overly Hautz originated single or double bolt adjustment with push-pull action.Fits Nema Frame Size 184T motors. Features Push-Pull Adjustment for belt installation and removal,.


Adjustable Steel Motor Mounting Base, For NEMA Frames 145T/145, Bolt Size 5/16 Inch, Length 10 1/2 Inches, Height 1 1/8 Inches, Width 8 1/2 Inches
By Overly Hautz
In Stock
$31.39
$24.92
You Save: 21%

mpn: 145,

4.6 out of 5 stars with 32 reviews
Pan Bases for Smaller Motors - Style A. These bases are intended primarily for smaller motors ranging from large fractionals to approximately 20 horsepower. They feature a one-piece formed base plate and the Overly Hautz originated single or double bolt adjustment with push-pull action.Fits Nema Frame Size 145T motors. Features Push-Pull Adjustment for belt installation and removal,.


Motor Starter 20hp 3ph 230V magnetic starter control from GE General ELectric 60 amp for air compressor electric motor
By WEG
In Stock
$199.95

mpn: Weg65 3phase, ean: 0687927981881,

4.3 out of 5 stars with 84 reviews
THIS IS A BRAND NEW IN THE BOX WEG MAGNETIC STARTER. COMPLETE AND READY TO USE. THIS STARTER IS RATED AT 20HP - THREE PHASE - WITH A VOLTAGE RANGE OF 208-240 VOLTS. THIS STARTER IS SPECIFICALLY DESIGNED TO BE USED WITH 20HP THREE PHASE 230V ELECTRIC MOTORS. HORSEPOWER: 20 PHASE: THREE (3 POLE) VOLTAGE: 208 THROUGH 240 COIL VOLTAGE RANGE. THIS STARTER WILL HANDLE ANY VOLTAGE BETWEEN 208-240 ENCLOSURE: NEMA SIZE 1 OVERLOAD RELAY: 50 - 63 AMPS AMP RATING: 65 MAX MADE IN BRAZIL PLEASE SEE OUR


Adjustable Steel Motor Mounting Base, For NEMA Frames 215T/215, Bolt Size 3/8 Inch, Length 15 Inches, Height 1 3/4 Inches, Width 12 1/2 Inches
By Overly Hautz
In Stock
$39.97
$30.95
You Save: 23%

mpn: 215, ean: 0696738334465,

4.3 out of 5 stars with 103 reviews
Pan Bases for Smaller Motors - Style A. These bases are intended primarily for smaller motors ranging from large fractionals to approximately 20 horsepower. They feature a one-piece formed base plate and the Overly Hautz originated single or double bolt adjustment with push-pull action.Fits Nema Frame Size 215T motors. Features Push-Pull Adjustment for belt installation and removal,.


Rapidkut EN2011232 6-32/ HSS Standard Thread Round Die, Degrees_Celsius, to Volts, Amps
By Rapidkut
In Stock
$75.26

mpn: EN2011232,

4.6 out of 5 stars with 126 reviews
6-32/HSS standard thread round die, Brand Name: Rapidkut, Number of Items: 1, Manufactured In United States, Easy to Use.Standard thread round adjustable dies. High speed steel. Manufactured in United States.


YXQ 100W 100Ohm Rheostat Ceramic Sliding Disk Variable Power Resistors Adjustable Wirewound with Potentiometer Pot(2 Pcs)
By YXQ
In Stock
$21.99
$21.97

mpn: y1000x9, ean: 0603813843194,

4.2 out of 5 stars with 112 reviews
Products are widely used in national defense construction, national key scientific research projects and railway, metallurgy, high and low voltage electrical, power, CNC, instrumentation, home appliances, mixers, mixers, fans, power tools and other industries. Note: Please avoid the use of salt, wet, dust, corrosive and other environmental use, likely to cause broken wire diameter, the installation of careful not to let the surface dust, otherwise it will cause disconnection or poor contact.


Refaxi Solar Charge Controller Battery Charger Regulator 12V 24V Dual USB (PWM 20A)
By ReFaXi
In Stock
$12.29

mpn: rq-6lgn-h9wa, ean: 6912101121130,

4.6 out of 5 stars with 149 reviews
Specification: System voltage: 12V/24V Control mode: PWM pulse adjustment mode USB output: 5V/2.5*2 Standby current: less than 10mA Material: PVC Color: black blue Size: 133*70*35mm/5.23*7.25*1.37'' Current: 20A Features: 1.Build-in industrial micro controller. 2.One-key setting,digital display,auto memory function. 3.Fully 4-stage PWM charge management. 4.Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections 5.Dual mosfet Reverse current


TOPCHANCES CNC Item 0.4KW Spindle Motor ER11 Mach3 PWM Speed Controller with Mount 3.175mm (Ships via DHL)
By TOPCHANCES
In Stock
$102.99

mpn: 051601, ean: 6920836346407,

4.5 out of 5 stars with 11 reviews
Parameter(Motor): 1. Work voltage: 12-48VDC 2. Rotation speed: 3000-12000r/min 3. Power: 400W 4. Torque:500mN.m 5. Insulation resistance:>2Megohm 6. Dielectric strength:400V 7. Motor Length : 186mm 8. Diameter:52mm 9. Axis collet Length: 48mm 10. Diameter of Axis collect holder:16mm 11. Repeat accuracy: 0.01-0.03mm 12. ER11 collect: 3.175mm Control mode: 1. Default potentiometer control (5K-100K),defaults 10 2. MACH3 -PWM speed control signal input, external PWM input requirements: level


Rapidkut EN2011336 8-36 / Standard Thread Round Die
By Rapidkut
In Stock
$75.26

mpn: EN2011336,

4.0 out of 5 stars with 126 reviews
8-36/standard thread round die, Brand Name: Rapidkut, Number of Items: 1, Manufactured In United States, Easy to Use.Standard thread round adjustable dies. High speed steel. Number of Items: 1.


LM YN Stepper Motor Controller 0.3K-30K PWM Pulse Output Adjustable DC5-32V Power Supply
By LM YN
In Stock
$13.99

ean: 0612957707866,

4.1 out of 5 stars with 27 reviews
Description: Stepper motor controller, the use of DC 5 ~ 32V power supply, adjustable 0.3K - 30K PWM pulse output. With the stepper motor driver, together with the control of the stepper motor operation. Module parameters: Input voltage: DC 5V ~ 32V Working temperature: -20 ~ 60 ℃ Module size: 70mmm * 45mm * 12mm; Screw hole size: 3.0mm * 4 Port description 1. Signal output connection description VCC: Positive power supply, 5V-32V GND: Negative power supply VOUT: 5.0V output, VCC = 9V: VOUT


MagiDeal Motor Speed Controller, DC 10V-55V PWM Brushed DC Motor Speed Controller Adjustable Driver CW CCW Reversible Switch with Digit Display
By MagiDeal
In Stock
$33.98
$16.99
You Save: 50%

mpn: 0755008950039USA,

4.3 out of 5 stars with 121 reviews
Description: - Easy-to-use: Just connected to the item - High performance: High efficiency, high torque, high-power, high heat dissipatio - Outer casing: it is designed to protect the controller board from damage as well as dissipate heat. - Bidirectional rotation: setting direction of rotation is optional, which means that accomplishes reversing the motor's direction - The Speed controller is made with high quality circuit boardSpecification: - Input Voltage: DC10V-55V - Output Voltage: Linear


Magnetic Electric Motor Starter 7.5 HP Single Phase Control 220/240V 30-40A
By Gas and Water
In Stock
$66.95

mpn: P40GW, ean: 0662425059010,

4.0 out of 5 stars with 14 reviews
Brand new magnetic starter for up to 7.5 HP single phase 220-240 volt with steel housing and Heavy-Duty Contactor. Best quality starter with built-in overload adjustable from 30-40 amps. Manual reset button that can be switched to auto reset. Steel housing with four 3/4''punch out holes for incoming and outgoing wires. Includes three rubber grommets for the 3/4'' holes to protect connecting wires.Starter Rating: 7.5hp, 220-240volt, single phase. Amp Rating: 30-40 amps / adjustable. Nominal 40


Motor Starter 15hp 3ph 230V magnetic starter control from GE General ELectric 50 amp for air compressor
By WEG
In Stock
$179.50

mpn: WEG50 3-phase, ean: 0687927981898,

4.8 out of 5 stars with 15 reviews
THIS IS A BRAND NEW IN THE BOX WEG MAGNETIC STARTER. COMPLETE AND READY TO USE. THIS STARTER IS RATED AT 15HP - THREE PHASE - WITH A VOLTAGE RANGE OF 208-240 VOLTS. THIS STARTER IS SPECIFICALLY DESIGNED TO BE USED WITH 15HP THREE PHASE 230V ELECTRIC MOTORS. HORSEPOWER: 15 PHASE: THREE (3 POLE) VOLTAGE: 208 THROUGH 240 COIL VOLTAGE RANGE. THIS STARTER WILL HANDLE ANY VOLTAGE BETWEEN 208-240 ENCLOSURE: NEMA SIZE 1 OVERLOAD RELAY: 32 - 50 AMPS AMP RATING: 50 MAX MADE IN BRAZIL PLEASE SEE OUR


SODIAL(R) Mic Stand Professional On Tripod Adjustable Black with Free Microphone Clip
By SODIAL(R)
In Stock
$29.42

mpn: 011026, ean: 4894462063378,

4.4 out of 5 stars with 11 reviews
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) Mic Stand Professional On Tripod Adjustable Black with Free Microphone Clip.Metal base with foldable legs and rubber non-slip feetAdjustable height, boom angle and armWith attached Mic clip which fits all standard microphonesEasy to install and lightweight to carry aroundSuitable for stage performance, meeting room,


uniquegoods 12V 24V 36V 48V 40A(max) PWM DC Motor Speed Controller CCM9NW HHO Adjustable Variable Speed Switch with Wire Harness
By uniquegoods
In Stock
$19.89
$15.88
You Save: 20%

mpn: CCM9NW, ean: 0605145001662,

4.9 out of 5 stars with 58 reviews
Features: CCM9NW DC Motor Speed Controller provides variable speed capability for DC motor. Adjustable speed range is 5%-100%. Three PWM frequency can be choose: 240Hz, 2.2kHz, 22kHz; Suitable for the DC motor (or DC load) within 30A, Peak current 40A(max). The use of ambient environment temperature is -20℃(-4℉) to 40℃(104℉) potentiometer cable length 40cm. Operating instruction: Before you attempting to wire the controller, make sure power is off. WARNING: DO NOT REVERSE POSTIVE


TOOGOO(R) 12V 24V 36V 48V 40A (max) PWM DC Motor Speed Controller Adjustable Variable speed Switch CCM9N Regulator Driver
By TOOGOO(R)
In Stock
$12.19

mpn: 124961, ean: 4894621836041,

4.5 out of 5 stars with 120 reviews
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 12V 24V 36V 48V 40A (max) PWM DC Motor Speed Controller Adjustable Variable speed Switch CCM9N Regulator DriverOutput power: 0.01W-2000W(max)The maximum continuous output current :30A; Peak current is up to 40A(max).Colour:blackMaterial:plasticOperating instruction: Before you attempting to wire the controller, make


Boston Gear G00977 DC-17A ACCESSORY KIT ADJUSTABLE ACCE
By Boston Gear
In Stock
$99.99

mpn: NA, ean: 7440117541509,

4.9 out of 5 stars with 63 reviews
Boston Gear G00977 DC-17A ACCESSORY KIT ADJUSTABLE ACCE.


3 PCS of TB6600 Stepper Motor Driver, Abuff 5A 9-40V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor Controls
By ABUFF
In Stock
$35.99

ean: 0663585692116,

4.1 out of 5 stars with 48 reviews
TB6600 arduino is an easy-to-use professional stepper motor driver, which could able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 arduino stepper motor driver has a wide range power input, 9~40VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. The stepper driver supports speed and direction control. You can


Adjustable Steel Motor Mounting Base, For NEMA Frames 284, Bolt Size 1/2 Inch, Length 19 3/4 Inches, Height 2 Inches, Width 16 7/8 Inches
By Overly Hautz
In Stock
$74.36

mpn: 284B2,

4.9 out of 5 stars with 114 reviews
These bases are among the most popular fabricated metal styles ever designed by Overly Hautz. Each one features substantial ''Z'' bar construction, continuously welded into one rigid part. Dual positioning screws allow greater flexibility in shaft alignment.Fits Nema Frame Size 284T motors. Features Push-Pull Adjustment for belt installation and removal,. Dual Adjusting Screws allow for increased pull and control for tensioning and alignment..


uniquegoods 12V 24V 4A DC Motor Speed Controller Adjustable Variable Speed Current Overload Protector Positive-Stop-Reverse Speedpot Control CCM4N
By uniquegoods
In Stock
$12.87

mpn: CCM4N, ean: 0605145000047,

4.1 out of 5 stars with 98 reviews
Features: CCM4N DC Motor Speed Regulator provides variable speed capability for DC motor. Adjustable speed range is 0%-100%. The input voltage is DC 12V-30V. Equipped with a special potentiometer which can control the positive-stop-reverse rotation and speed of DC motor. (It can be replaced by rocker potentiometer.) Equipped with IC which can check the Hall-effect current. And it will stop working when the instantaneous peak current is up to 6.4A. Operating instruction:  Before you



Viewing Page 3 of 4

View more products in Electric Motors.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - armstrongspoint.org. All Rights Reserved.