Mounts & Accessories - Page 2 - Super Savings! Save up to 37%

Super Savings! Up to 37% off on Mounts & Accessories at Armstrongs Point, Page 2. Top brands include Dovewill, Yingte, Clippard Instrument, Walfront, MagiDeal, Overly Hautz, ReFaXi, Single Mom, OSG USA, uniquegoods, TENQ, RUNMIND, Unknown, Aigh Auality shop, HITSAN, WEG, & TWTADE. Hurry! Limited time offers. Offers valid only while supplies last.

Dovewill 12V 24V 36V 48V PWM DC Motor Speed Controller Reversible Adjustable Switch with Metal Case
By Dovewill
In Stock

mpn: d109b00d2a55437c453e828305cb99ec, ean: 0092624463347,

4.4 out of 5 stars with 43 reviews
Description: - DC 12V 24V 36V 48V DC Motor Speed Controller. - High efficiency, high torque, low heat generating. - Control the speed of a DC motor with this controller. - 40A high power forward and reverse speed switch. - Positive and negative polarity relay switching Built-in 2 80A high current relay.Specification: - Operating voltage: 10V-50V - Output voltage: linear under load - Maximum current: 60A - Continuous current: 40A - Speed range: 0% - 100% - Forward rotation: Yes - Speed control

Adjustable Angle Drill Jig,Yingte Adjustable Angle Drill Jig Holder Guide Stand Drill Positioning Bracket for Electric Drill
By Yingte
In Stock

mpn: YT06021010, ean: 6460862067650,

4.1 out of 5 stars with 74 reviews
Specification: Material: Aluminum Die Casting Holding diameter: 42.5mm Adjustable angle: -45° to 0°, 0° to 45° Total height: 290mm Width: 140mm NOTE: The electric drill that in the picture is not attached with the drill guide.The electric drill is only with the show. Features: 1. A drill guide that can be used in horizontal, vertical or angular position. 2. The angular position can rise to 45 degrees and the base rubber pad holds the guide in place. 3. The drill adapter itself slides up and

Clippard Mfc-1 Miniature Adjustable Needle Valve
By Clippard Instrument
In Stock

mpn: MFC-1,

4.5 out of 5 stars with 97 reviews
Miniature Adjustable Needle ValveCLIPPARD FLOW CONTROL.

DC Motor Speed Controller with Overload Protector 12V 36 V 48V 30A Slow Start Adjustable Speed Board for Permanent Magnet DC Brushed Motor
By Walfront
In Stock

mpn: Walfrontem8tga4x5p, ean: 0736691540494,

4.1 out of 5 stars with 98 reviews
This speed controller for permanent magnet DC Motor is industrial product with high stability. It's the combination of speed controller and overload protector. With the slow start function, it will help a lot in protecting the speed controller and motor from instantaneous large current. With locked-rotor protection function, it is capable of limiting large current caused by locked rotor, rather than cutting off power. It's also upgraded with low-voltage protection. All in all, this is a

MagiDeal Stepper Motor Driver 2-Stage 4-Wire Adjustable Speed Remote Controller
By MagiDeal
In Stock
You Save: 37%

mpn: 0021000200076ITA, ean: 0074470698012,

4.6 out of 5 stars with 148 reviews
Description: - Driving voltage: DC4-6V / 300-500mA - USB power supply, 5V mobile phone charger or battery powered - Drive motor: 2-phase 4-wire stepper motor - 3-24V stepper motor can drive rotation, But the torque is slightly different - Speed display: 0-9 adjustableSpecification: - Material: Material - Product details Size: 52x36mm/2.05x1.42inchPackage Includes:1 Piece Stepper Motor Adjustable Speed Card Driver1 Piece Remote Controller1 Piece WireNote:The packaging material is anti-static

Adjustable Steel Motor Mounting Base, For NEMA Frames 256, Bolt Size 1/2 Inch, Length 17 3/4 Inches, Height 2 Inches, Width 16 7/8 Inches
By Overly Hautz
In Stock
You Save: 5%

mpn: 256B2,

4.1 out of 5 stars with 42 reviews
These bases are among the most popular fabricated metal styles ever designed by Overly Hautz. Each one features substantial ''Z'' bar construction, continuously welded into one rigid part. Dual positioning screws allow greater flexibility in shaft alignment.Fits Nema Frame Size 256T motors. Features Push-Pull Adjustment for belt installation and removal,. Dual Adjusting Screws allow for increased pull and control for tensioning and alignment..

Adjustable Steel Motor Mounting Base, For NEMA Frames 213T/213, Bolt Size 3/8 Inch, Length 15 Inches, Height 1 3/4 Inches, Width 11 Inches
By Overly Hautz
In Stock
You Save: 15%

mpn: 213, ean: 0696738017306,

4.7 out of 5 stars with 67 reviews
Pan Bases for Smaller Motors - Style A. These bases are intended primarily for smaller motors ranging from large fractionals to approximately 20 horsepower. They feature a one-piece formed base plate and the Overly Hautz originated single or double bolt adjustment with push-pull action.Fits Nema Frame Size 213T motors. Features Push-Pull Adjustment for belt installation and removal,.

Refaxi LM317 Adjustable Stabilized Voltage Supply Board Kit Continuously Adjustable Voltmeter
By ReFaXi
In Stock

mpn: yu_7asr_f9fe, ean: 6912101109664,

4.0 out of 5 stars with 27 reviews
Material: PCB color: blue Size: 78MM*59MM Weight: 243G. Product parameters: 1: The output voltage of this power supply: 1.25-12V adjustable. 2: Power supply: 2W. 3: One-way adjustable signal output, convenient to provide pulse signal to the test circuit, with logic function, convenient to give the logic level of the test circuit, with 1 channel peaking circuit, can test the continuity of the wire, can be installed shell, shell Size: 110*70*50MM Product list: delivery list as shownMaterial: PCB.

DC10-55V 40A Brush Motor Speed Controller Speed Regulator Governor Overload Protection Board Variable Adjustable
By Single Mom
In Stock

mpn: Tools18B-5M00142, ean: 7426883955184,

4.9 out of 5 stars with 146 reviews
Description: This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. It support soft start, locked rotor protection, low voltage protection. Features: Speed controller is made with high quality circuit board which ensures a longer service life. This simple and easy-to-use DC motor speed controller has an stable performance. This motor speed controller uses

OSG USA EN2012432 5/16-18 / HSS Standard Thread Round Die
In Stock

mpn: EN2012432,

4.8 out of 5 stars with 10 reviews
Standard thread round adjustable dies, Sold as each and Easy to use, Highly wefficient in performance, 5/16-18/HSS standard thread round dieStandard thread round adjustable dies. Sold as each and Easy to use. Highly wefficient in performance.

uniquegoods CCM6DS 12V 24V 36V 50V 30A(max) DC Motor Speed Controller Adjustable Speed Governor PWM 1500W(max)
By uniquegoods
In Stock
You Save: 30%

mpn: CCM6DS, ean: 0605145000023,

4.6 out of 5 stars with 55 reviews
Features: CCM6DS DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).Suitable for the DC motor (or DC load):12V,250W below;24V,350W below,36V,500W below. Adjustable speed range is from 0%-100%.  Potentiometer with switch function. Incorporate a 30A fuse, and with the protection function of reverse connect power supply. Potentiometer cable length 20cm. Equipped with aluminum shell and connection label, installed easily. Operating

TENQ Fixed Bracket Support for Kenwood Radio TK271 TK471 TK-6110 TM-271A TK-7160 TK-7160H
In Stock

mpn: T034, ean: 0702563655610,

4.1 out of 5 stars with 123 reviews
TENQ® Fixed Bracket Support for Kenwood Radio TK271 TK471 TK-6110 TM-271A TK-7160 TK-7160H Description: 1.CB radio accessories 2.Adjustable mounting bracket 3.Universal Bracket Fits most Radios 4.Use to Mount CBs, Scanners, Radar/Laser Detectors or Stereos 5.Has multiple holes for installing the radio at varying heights and angles. Compatible with: KENWOOD TK-6110, TK-7180, TK-8180, TM-271, TK-7102, TK-8102, TK-8108, TK-7160, TK-8160, TK-7100, TK-8100, TK-7302, TK-8302CB radio accessories.

RUNMIND 400W Motor Speed Controller AC 110V Input DC 0-90V Output Electric Speed Regulator wiith Knob Switch Adjustable, White
In Stock

mpn: 733403650489, ean: 0733403650489,

4.9 out of 5 stars with 34 reviews
Package Included:1 x AC 110V Motor Speed ControllerFeatures:Operating Voltage(Input Voltage): AC 110VPower: 0.01-400WMotor Current: 0 to 2.2 AmpsOutput Voltage: DC 0-90V adjustableWiring:AC, AC: AC 110V inputA+, H-: Motor+ and Motor- (DC output)PW, PW: Motor emergency stop. Connect the PW and PW, the motor will be stopped emergentlyThe controller is used for single (1/3) phase DC motorWith Over Current protection and short circuit protectionNote: You should use the controller by increasing the

Frequency Generator Module Frequency Modulation System - 10pcs NE555 Pulse Frequey Duty Cycle Adjustable Module Square Wave Signal Generator Stepper Motor Driver ( Radio Frequency Module)
By Unknown
In Stock

mpn: 5603007137462, ean: 5603007137462,

4.7 out of 5 stars with 11 reviews
Features: 1. As a square wave signal generator,generates a square wave signal used for experimental depment. 2. Used to drive a stepper motor for generating a square wave drive signal. 3. Generate adjustable pulse for MCU. 4. Generate adjustable pulse,to co circuitry associated. 5. Size: 31mm x 22mm 6. Main chip: NE555 7. Input Vtage: 5V-15V DC. when power supply is 5 V , the output t can be 15 MA around; when 12V power supply, the output t can 35 MA around 8. Input t: >=100 MA 9. Output

JK021 Delay Relay Module AC220V 1-200S AC220V Power-ON Delay OFF-ON Adjustable Delay Time
By Aigh Auality shop
In Stock

mpn: pcb board, ean: 7738902585013,

4.4 out of 5 stars with 92 reviews
Brand Name : ISis_customized : YesSupply Voltage : 220VType : Logic ICsOperating Temperature : -30~85 CelsiusCondition : NewModel Number : Delay Relay ModuleApplication : Delay Relay ModuleDescription: 1.Delay time:0-200 seconds 2.Initial state:ON 3.After delay time state:OFF 4.Size:65*38mm 5.Input voltage:220V 6.Load voltage:220VOPS-1 DIY Light-Operated Switch Kit Electronic Circuit Big Sale 5pcs Sound Module Trigger Dog Animals Barking Music 3V Yelp Voice Module for DIY/Toy Big Sale 5.8GHZ

HITSAN EleksMaker EleksZAxis Adjustable Z Axis Laser Module Motor Holder DIY Kit for A3 A5 Engraver One Piece
In Stock

mpn: 1177750, ean: 8903559879658,

4.1 out of 5 stars with 59 reviews
Elekszaxis is well  compatible with  eleksmaker a3 / a5 engraver, but you need to install it yourself: features: - suitable for holding laser module, spindle motor. - this pecfect diy kit can add an adjustable z axis to your engraver. - if install it on eleksmaker a3 / a5 engraver, you need to replace the  original manase 2 axis board with mana 3 axis boardpackage included: 1 x elekszaxis holder(spindle motor not included)notice: elekszaxis is sent unassembledly, please refer to the

Motor Starter 10hp 1ph 230V magnetic starter control from GE General ELectric 50 amp for air compressor
In Stock

mpn: WEG65 1 phase,

4.3 out of 5 stars with 92 reviews
10hp single phase 208-240volt coil range 65 amp contactor. Adjustable overload relay range 32 - 50 amps. Nema 1 enclosure - Side mounted auxiliary contacts N/O & N/C. THIS STARTER IS DESIGNED FOR 7.5 or 10HP SINGLE PHASE APPLICATIONS.

TWTADE/RR-PWM-15V Low Voltage 1.8v 3v 5v 6v 7.2v 12v 2A 30W DC Motor Speed Controller (PWM) Adjustable Driver Switch MX2A12V
In Stock

ean: 0707516167639,

4.9 out of 5 stars with 61 reviews
1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse in line with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through

uniquegoods 6V 12V 24V Digital Display LED DC Motor Speed Controller PWM Stepless Speed Control Switch HHO Driver - Black CCM5D
By uniquegoods
In Stock
You Save: 10%

mpn: CCM5D, ean: 0605145000665,

4.2 out of 5 stars with 63 reviews
Features: CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions. The display range of 3-digit LED display is ''000''-''100''. (For example, displayed ''066'' as the picture 1, it means that the PWM output duty cycle is 66%.) Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 5A, Peak current 8A. Incorporate a push key.

2Pcs NE555 Pulse Generator Frequency Duty Cycle Adjustable Module Square/Rectangular Wave Stepping Motor Driver
By Aigh Auality shop
In Stock

mpn: pcb board, ean: 7105208824137,

4.0 out of 5 stars with 21 reviews
Type : Voltage RegulatorOperating Temperature : standardModel Number : NE555 Pulse Generator Frequencyis_customized : YesApplication : ComputerBrand Name : diymoreDissipation Power : standardSupply Voltage : standardCondition : NewPackage : other the scope of this module: 1 is used as a square wave signal generator generates a square wave signal used for experimental development. 2 to drive a stepper motor for generating a square wave drive signal. 3 adjustable pulse generated for use by

Viewing Page 2 of 4

View more products in Electric Motors.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - All Rights Reserved.